LM317AMDT NOPB PMIC Power Management ICs SMD / SMT Linear Voltage Regulators

Product Description

LM317AMDT/NOPB PMIC Power Management ICs Linear Voltage Regulators 3 TERMINAL ADJ REG Tube LM317AMDTNOPB

Features

• For a newer drop-in alternative, see the LM317

• Typical 0.005%/V line regulation

• 1% output voltage tolerance

• 1.5-A output current

• Adjustable output down to 1.25 V

• Input-output differential up to 40 V

• Current limit constant with temperature

• No output capacitor required

• Short-circuit protected output

• −40°C to 125°C operating temperature range

2 Applications

• Automotive LED lighting

• Battery chargers

• Post regulation for switching supplies

• Constant-current regulator

• Microprocessor supplies

3 Description

The LM317A adjustable 3-terminal, positive-voltage regulators are capable of supplying current in excess of 1.5 A over a 1.25-V to 37-V output range and provide 1% output-voltage accuracy. Both line regulation and load regulation are better achieved with the LM317A device than with standard fixed regulators.

The LM317A offers full overload protection such as over current, thermal-overload protection, and safearea protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected

Typically, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors, in which case an input bypass is needed. An optional output capacitor can be added to improve transient response and can be replaced with a ceramic and appropriate ESR. The adjustment terminal can be bypassed to achieve very high ripplerejection ratios that are difficult to achieve with standard 3-terminal regulators. 

Because the LM317A regulator is floating and detects only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input-to-output differential is not exceeded. Exceeding the maximum input-to-output deferential will result in short-circuiting the output. By connecting a fixed resistor between the adjustment pin and output, the LM317A can be also used as a precision current regulator