|Unit Weight:||666 Mg||Width:||4 Mm (Max)|
ADG609BRZ-REEL Multiplexer Switch ICs,
SOIC-16 Multiplexer Switch ICs,
4mm Multiplexer Switch IC
ADG609BRZ-REEL Multiplexer Switch ICs NCP705MTADJTCG AD5245BRJZ100 RL7 Semiconductors
+3 V, +5 V, 65 V Power Supplies VSS to VDD Analog Signal Range Low On Resistance (30 V max) Fast Switching Times tON 75 ns max tOFF 45 ns max Low Power Dissipation (1.5 mW max) Break-Before-Make Construction ESD > 5000 V as per Military Standard 3015.7 TTL and CMOS Compatible Inputs
Automatic Test Equipment Data Acquisition Systems Communication Systems Avionics and Military Systems Microprocessor Controlled Analog Systems Medical Instrumentation Battery Powered Instruments Remote Powered Equipment Compatible with 65 V DACs and ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
The ADG608 and ADG609 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels respectively, fully specified for ±5 V, +5 V and +3 V power supplies. The ADG608 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. The ADG609 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. All the address and enable inputs are TTL compatible over the full specified operating temperature range, making the parts suitable for bus-controlled systems such as data acquisition systems, process controls, avionics and ATEs since the TTL compatible address inputs simplify the digital interface design and reduce the board space requirements. The ADG608/ADG609 are designed on an enhanced LC2 MOS process that provides low power dissipation yet gives high switching speed and low on resistance. Each channel conducts equally well in both directions when ON and has an input signal range which extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.
1. Extended Signal Range The ADG608/ADG609 are fabricated on an enhanced LC2 MOS process giving an increased signal range which extends to the supplies.
2. Low Power Dissipation
3. Low RON
4. Fast Switching Times
5. Break-Before-Make Switching Switches are guaranteed break-before-make so that input signals are protected against momentary shorting.
6. Single/Dual Supply Operation
|Product Category:||Multiplexer Switch ICs|
|2 x 4:1|
|+/- 4.5 V|
|+/- 5.5 V|
|- 55 C|
|+ 125 C|
|Height:||1.5 mm (Max)|
|Length:||10 mm (Max)|
|Off Isolation - Typ:||85 dB|
|Operating Supply Voltage:||5 V|
|Pd - Power Dissipation:||1.5 uW|
|Product Type:||Multiplexer Switch ICs|
|Factory Pack Quantity:||2500|
|Width:||4 mm (Max)|
|Unit Weight:||0.023492 oz|
Related stock models
1. We can offer products according to customer's BOM list. One stop purchase.
2. All kinds of chips, various types and complete brands.
3.More than 15years for sales original IC parts.
4. Comprehensive customer service: from customer consultation to after sales service.
5. Walton can offer sample for free , but client have to pay shipping cost. Contact us if needed.
Contact Number/Whatsapp: +86-199 2879 8470